RDS ICP 300 Guía de usuario descargar pdf (Pagina 5)

ICP 300 IN-CAB PRINTER

Operation

When installed with a Wizard instrument the printer is normally powered on

as the vehicle is started.

When installed with a Pro-Series/Psi instrument the printer is powered on

when the instrument is switched on.

The status LED illuminates and the printer mechanism is reset.

Pressing the button advances the paper.

Power-On Self-Test

Press and hold the button and then power up the instrument. The

printer will then print a self-test report.

The self-test procedure checks most of the printer functions except for the

serial interface

Status LED

If there is a problem with the printer, the status LED will indicate a fault

condition by a flashing sequence as follows.

LED Indication Condition Solution

On Normal -

Off No Power -

* * * Paper Out Fit new paper

** ** ** Print head too hot Allow head to cool

*** *** *** Power below 10V dc Check supply +V

1 2 3 4 5 6 7 8 9

Sin comentarios

RDS ICP 300 Guía de usuario Pagina 5